• These articles are optimized as...

  • Automotive Diagnostics Accessories

  • MT03A, Milliohm and Electric Motor Tester Kit

    • Item no.: PQ326
      • PC-hosted low-resistance precision measurement
      • 4-wire Kelvin measurement
      • Automatic temperature compensation
      • Measuring range: up to 2 Ohms
      • Resolution: 10µOhm
      • Accuracy: ±(0,5% + 100µOhm)
      • Many possible applications in different industries
    • 724,00 €
    • Excluding 19% VAT.
    • Shipping time: 3 - 3 workdays
    + - pc.

  • Pico 2-Pole Tester

    • Item no.: TA466
    • Voltage measuring device for occupational safety on electric vehicles
    • 301,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + -

  • Pico Insulation Tester

    • Item no.: TA467
      • for testing high-voltage cables in electric vehicles
      • C/DC voltage and current measurements
      • Diode test
      • Resistance
      • Capacity
      • Frequency
      • Duty cycle
      • Temperature via thermocouple
    • 243,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + -

  • Premium Test Lead - Single Unit

    Premium Test Lead - Single Unit
    • Item no.: TA125ff
    • Variations in: colour, length
    • Choice of different lengths and colours
    • 3m or 5m long
    • colours: blue, red, green or yellow
    • fully shielded
    • insulated BNC plug at scope connection
    • shrouded/stacking banana plugs
    • starting from 49,00 €
    • Excluding 19% VAT.

  • Premium Test Lead, Black, 5m - Single Unit

    • Item no.: TA203
    • Premium Test Lead, black, 5m, BNC Plug to 4mm Banana Plugs
    • 66,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Premium Test Lead Kit, 3m

    • Item no.: PP718
    • premium test lead set
    • cable length 3m
    • fully shielded
    • set with four colours
    • insulated BNC Plug to 4mm shrouded banana plug
    • 185,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Premium Test Lead Kit, 5m

    • Item no.: PP941
    • premium test lead set
    • cable length 5m
    • fully shielded
    • set with four colours
    • insulated BNC Plug to 4mm shrouded banana plug
    • 251,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Adapter Cable, BNC to 4mm Banana Plug

    Adapter Cable, BNC to 4mm Banana Plug
    • Item no.: MI029
    • Adapter Cable, BNC to 4mm Banana Plug
    • 16,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Measuring Lead with Isolated BNC Plugs, 5m

    • Item no.: TA130
    • Coaxial cable with two isolated BNC plugs, lead length: 5m.
    • 31,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Adapter Cable, BNC to Alligator Clamps

    Adapter Cable, BNC to Alligator Clamps
    • Item no.: MI031
    • Adapter Cable, BNC to Alligator Clamps
    • 8,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • BNC measuring lead, 1.2m

    • Item no.: MI030
    • BNC measuring lead, 1.2m
    • 12,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Adapter BNC Plug to 4mm Sockets, Shrouded, Insulated

    Adapter BNC Plug to 4mm Sockets, Shrouded, Insulated
    • Item no.: MI078
    • Adapter BNC Connector to 4mm Sockets
    • 21,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Multimeter Probe with 4mm Banana Socket

    Multimeter Probe with 4mm Banana Socket
    • Item no.: TA001ff
    • Variations in: Colour
    • Multimeter probe
    • 6,00 €
    • Excluding 19% VAT.

  • Sprung Hook Probe, Shrouded

    • Item no.: TA089ff
    • Variations in: Colour
    • Sprung Hook Probe
    • 6,00 €
    • Excluding 19% VAT.

  • Small Crocodile (Gator) Clip for 4mm Banana Plug

    Small Crocodile (Gator) Clip for 4mm Banana Plug
    • Item no.: TA003ff
    • Variations in: Colour
    • Small crocodile (gator) clip, black
    • 2,50 €
    • Excluding 19% VAT.

  • Large Dolphin (Gator) Clip

    • Item no.: TA005ff
    • Variations in: Colour
    • Large dolphin (gator) clip
    • 10,00 €
    • Excluding 19% VAT.

  • 1000V Backpinning Probe

    • Item no.: TA558ff
    • Variations in: Colour
    • Flexible Back-Pinning Probe, black
    • 37,00 €
    • Excluding 19% VAT.

  • Flexible Backpinning- Sonde

    Flexible Backpinning- Sonde
    • Item no.: TA161ff
    • Variations in: Colour
    • Flexible Back-Pinning Probe, black
    • 4,00 €
    • Excluding 19% VAT.

  • Banana Plug Adaptor,Shrouded to Unshrouded

    Banana Plug Adaptor,Shrouded to Unshrouded
    • Item no.: TA016ff
    • Variations in: Colour
    • Banana Plug Adaptor,Shrouded to Unshrouded
    • 3,00 €
    • Excluding 19% VAT.

  • Car Battery Clip

    Car Battery Clip
    • Item no.: TA157ff
    • Variations in: Colour
    • Car Battery Clip
    • 2,50 €
    • Excluding 19% VAT.

  • Adaptor, Shrouded 4mm to 2mm Plug

    • Item no.: TA306ff
    • Variations in: Colour
    • Adaptor for the connection to third party breakout boxes.
    • 4,00 €
    • Excluding 19% VAT.

  • Piercing clips (pair)

    Piercing clips (pair)
    • Item no.: TA007
    • Piercing clips (pair)
    • 60,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Acupuncture Probe Kit

    Acupuncture Probe Kit
    • Item no.: TA008
    • Acupuncture Probe Kit
    • 41,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • TA375, Passive 100 MHz Voltage Divider Scope Probe, 1:1/10:1

    • Item no.: TA375
    • Voltage divider scope probe
    • 600V
    • 100MHz
    • x1/x10
    • 26,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • TA386, Passive 200 MHz Voltage Divider Scope Probe, 1:1/10:1

    TA386, Passive 200 MHz Voltage Divider Scope Probe,...
    • Item no.: TA386
    • Voltage divider scope probe
    • 600V
    • 200MHz
    • x1/x10
    • 40,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • MI053, Differential Oscilloscope Probe, 700V, 25MHz, x10/x100, CAT III

    • Item no.: TA041
    • Differential oscilloscope probe
    • 700V
    • 25MHz
    • x10/x100
    • CAT III
    • 379,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Current Clamp 20A/60 A AC/DC with BNC plug

    Current Clamp 20A/60 A AC/DC with BNC plug
    • Item no.: TA018
    • Current Clamp 20A/60 A AC/DC with BNC plug
    • 102,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Current Clamp Adaptor, 30A AC/DC

    • Item no.: TA234
      • Current Clamp Adaptor, 30A AC/DC
      • Measuring range: 30mA to 30A DC (accurate)
      • Accuracy: ±(2% of reading ±2mA)
      • BNC connector
      • Max. wire diameter: 19mm
    • 266,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Precision Current Clamp Adaptor, 30A AC/DC with Large Jaws

    • Item no.: TA189
      • 30A AC/DC Large Jaw Current Clamp
      • large bandwidth: DC to 100kHz
      • BNC connector
      • closed loop control system for better accuracy
    • 459,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • Current Clamp Probe 600A AC/DC with BNC Connector

    Current Clamp Probe 600A AC/DC with BNC Connector
    • Item no.: TA019
      • Low–battery indicator 
      • Zero offset button
      • BNC type connectors
      • Screened lead for noise suppression
    • 142,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Current Clamp Adapter, 2000A/200A AC/DC, BNC Connector

    Current Clamp Adapter, 2000A/200A AC/DC, BNC Connector
    • Item no.: TA167
    • with BNC plugg for connection i.e. to an oscilloscope
    • jaws opening capacity:  max. 32mm
    • provides 10mA/A and 1mV/A for AC and DC currents
    • frequency range: DC to 20kHz
    • 269,00 €
    • Excluding 19% VAT.
    • Shipping time: 7 - 7 workdays
    + - pc.

  • 6- Way Universal Automotive Breakout Leads, Set of 4 (micro, small, medium and large)

    • Item no.: PP943
    • 6- Way Universal Automotive Breakout Leads, Set of 4 (micro, small, medium and large)
    • 109,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • PicoScope Professional Breakout Lead Set

    • Item no.: TA514
      • 14 sets of four with flat blade connectors in different sizes
      • 4 sets of four with round pins in different sizes
      • 1 set of four with square pins in one size
      • Right-angle back-pinning probes with hard tip with 300mm extension lead
    • 278,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Roll-Up Pouch for Breakout Leads

    • Item no.: PA147
    • for storage of breakout leads
    • 16,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Automotive Sensor Breakout Lead

    • Item no.: TA012
    • Automotive Sensor Breakout Lead
    • 31,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Automotive Breakout Lead for ACS Sensors, 2-Pin

    • Item no.: TA190
    • Automotive Breakout Lead for ACS Sensors, 2-Pin
    • 38,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • AMP Superseal 3-pin ACS Sensor Breakout Lead

    • Item no.: TA267
    • 42,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Automotive Breakout Lead for Deutsch Sensors, 2 and 4-Pin

    • Item no.: TA192ff
    • Variations in: Automotive Breakout Lead for Deutsch Sensors
    • Automotive Breakout Lead for Deutsch Sensors, 2 and 4-Pin
    • starting from 38,00 €
    • Excluding 19% VAT.

  • Automotive Breakout Lead for Kostal Sensors

    • Item no.: TA194ff
    • Variations in: pin
    • Automotive Breakout Lead for Kostal Sensors, 2-Pin or 3-Pin
    • starting from 38,00 €
    • Excluding 19% VAT.

  • Deutsch DTPXX-4 Connector Breakout Lead for 4-pin Large Connectors

    • Item no.: TA205
    • 55,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Breakout Leads Kit A for Sensors and Actuators

    • Item no.: PP968

    • Breakout Leads Kit A for Sensors and Actuators

      Kit of 5 breakout leads (TA190 - TA194)

    • 211,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Connector Breakout Lead Kit B for Sensors and Actuators

    • Item no.: PQ030
    • This kit contains:
    • TA190 2-pin ACS breakout lead
    • TA191 3-pin Kostal breakout lead
    • TA194 2-pin Kostal breakout lead
    • TA267 3-pin ACS breakout lead
    • 156,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • COP Probe + COP Connecting Cable Kit

    COP Probe + COP Connecting Cable Kit
    • Item no.: PP357
    • COP Probe + COP Connecting Cable Kit
    • 180,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Mini ATC Fuse Extenson Lead

    • Item no.: TA035
    • Mini ATC Fuse Extenson Lead
      Max. 30Amps.
    • 20,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Standard ATC Fuse Extenson Lead

    Standard ATC Fuse Extenson Lead
    • Item no.: TA034
    • Standard ATC Fuse Extenson Lead
      Max. 40Amps.
    • 29,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Maxi Fuse Extenson Lead

    • Item no.: TA206
    • Maxi Fuse Extenson Lead
      Max. 60Amps.
    • 25,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • JCASE Fuse Extension Adaptor

    • Item no.: TA168
    • JCASE Fuse Extension Adaptor
      Max. 60Amps
    • 35,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Fuse Extenson Lead Kit

    Fuse Extenson Lead Kit
    • Item no.: PP967
    • Fuse Extenson Lead Kit
    • 89,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Secondary ignition pickup MI074

    Secondary ignition pickup MI074
    • Item no.: PP178
      • Capacitive secondary ignition pickup (automotive accessory)
      • 1.8m cable
      • BNC plug
      • Transmission factor: 10,000 : 1
    • 55,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Secondary Ignition Pickups, Short Leads Kit (4 pcs.)

    • Item no.: PP339
    • Kit of short capacitive secondary ignition pickups (4 pcs.), cable length: 40cm These probes have a 40cm cable with a BNC plug for the visualisation of the ignition voltage time trace on any automotive diagnosis oscilloscope.
    • 101,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Mixmaster, 12-Channel Ignition Signal Mixer

    • Item no.: PP361
    • Mixmaster, 12-Channel Ignition Signal Mixer
    • 385,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • COP Extension Lead Set (4 pcs.)

    • Item no.: PP400
    • COP Extension Lead Set (4 pcs.)
    • 171,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • CAN Test Box for the OBDII Port.

    CAN Test Box for the OBDII Port.
    • Item no.: PP619
    • Instantly check power and ground circuits
    • Identify communication link protocols
    • Connect an oscilloscope for signal capture and collection of signal waveform data
    • Compatible with both 12V and 24V vehicles
    • 266,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Connecting Cable with Grounding Clamp for COP Probes

    • Item no.: TA033
    • Connecting Cable with Grounding Clamp for COP Probes (TA033)
      Connecting Cable with Grounding Clamp for COP Probes (TA033)

      Accessory for COP probes.
      Connecting cable with 2 rubber-insulated BNC plugs (male) for connecting the probe and the scope.
      The grounding junction shall protect the scope against high voltage flashovers from the ignition system. The cable is equipped with a strain relief for its protection.

      Cable length: 3m
      Grounding cable length: 1.5m
      Position of the grounding cable: 1.5m before each cable head.
    • 25,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Keyless Entry Carrier Signal Detector

    Keyless Entry Carrier Signal Detector
    • Item no.: TA330
    • Detector for the detection of the presence of the keyless entry carrier frequency in vehicles.
    • 29,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • Ultrasonic Parking Sensor Detector

    Ultrasonic Parking Sensor Detector
    • Item no.: TA329
    • Ultrasonic detector for proving the correct operation of ultrasonic parking sensors.
    • 29,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • USB 2.0 Cable, 1.8m, blue

    USB 2.0 Cable, 1.8m, blue
    • Item no.: MI106ff
    • Variations in: Length
      • Pico USB 2.0 cable
      • Connectors: USB-A to USB-B
      • 1.8m or 4.5m
      • blue
    • starting from 9,00 €
    • Excluding 19% VAT.

  • USB 3.0 Cable, 1.8m, blue

    • Item no.: TA155
    • Pico USB 3.0 Cable, 1.8m, blue
    • 16,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • USB Type C Adaptor to Standard A

    • Item no.: TA285
    • USB 3.1 type C plug
    • USB 2.0 standard-A jack
    • Total length: 134mm
    • black
    • 24,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • S- Hook

    S- Hook
    • Item no.: MI168
    • S- Hook for Hanging the Measuring Leads
    • 3,50 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.

  • PA084, Protective Carry case for Pico Automotive Diagnostics Oscilloscopes

    • Item no.: PA084
    • PA084, Protective Carry case for Pico Automotive Diagnostics Oscilloscopes
    • 122,00 €
    • Excluding 19% VAT.
    • Shipping time: 0 - 0 workdays
    + - pc.
These articles are optimized as convenient measuring accessories for Pico automotive diagnostics oscilloscopes, and they can also be used in combination with automotive oscilloscopes of other makes, if they have BNC input sockets.

Large range of high quality automotive measuring accessories

Besides adapters,  breakout leads, probes, measuring leads and attenuators there is also the CAN test box, the 12-channel ignition signal mixer, the WPS500X pressure transducer, the WPS600 hydraulic pressure transducer as well as the NVH diagnostics kit for vehicle noise and vibration analysis.  
Back Go to top Print