TA095, Single-Axis IEPE Accelerometer
The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications.
Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE or the TA487, IEPE signal conditioner.
The TA095 is contained within a kit, which contains a calibration certificate and an introductory guide.
Mounting the accelerometer can be achieved either using the mounting stud fitted, or by using the optional TA096 mounting.
Technical data:
Performance specifications
Sensitivity (±15%): |
10.2mV/(m/s²) |
Measuring range: |
±490m/s² |
Frequency range: |
0.5Hz to 10kHz |
Broadband resolution (1Hz to 10kHz): |
3434µm/s² |
Nonlinearity: |
±1% |
Transverse sensitivity: |
≤ 7% |
Electrical specifications |
Settling time (within 1% of bias): |
≤ 2.0sec |
Discharge time constant: |
≥ 0.3sec |
Excitation voltage: |
18 to 28VDC |
Constant Current Excitation: |
2 to 20mA |
Output impedance: |
< 150 Ohm |
Output bias voltage: |
8-12VDC |
Spectral noise (10Hz): |
78.5 (µm/s²)/square root Hz |
Spectral noise (100Hz): |
49.1 (µm/s²)/square root Hz |
Spectral noise (1kHz): |
39.2 (µm/s²)/square root Hz |
Electrical isolation (case): |
> 100 MOhm |
Environmental specifications |
Overload limit (shock): |
49 050m/s² pk |
Temperature range: |
–54 °C to + 121 °C |
Enclosure rating: |
IP68 |
Physical specifications |
Size (hex x height): |
14mm x 64mm |
Weight (with cable): |
99.3g |
Mounting: |
stud |
Mounting thread: |
1/4-28 female |
Mounting torque: |
2.7 to 6.8Nm |
Sensing element: |
ceramic |
Sensing geometry: |
shear |
Housing material: |
stainless steel |
Sealing: |
molded |
Electrical connector: |
molded integral cable |
Cable length: |
3m |