Hydraulic Flow Meter (BSPP)

Item number: TA376ff

  • For use with the Automotive PicoScopes 4423, 4X25 and 4X25A only
  • Available in versions with 25 l/min, 300 l/min or 600 l/min
  • Embedded thermistor temperature sensor for oil temperature
  • Pressure test port for optional WPS500C hydraulic pressure sensor

Category: Automotive Pressure Sensors

Variants, Measuring Ranges: 

starting from 1.811,00 €

Excluding 19% VAT.

Delivery status: ca. 3-4 weeks

There are variations of this item. Please select the variation you wish.

Hydraulic Flow Meter (BSPP)

A range of flow meters designed for use with your automotive PicoScope are available to match the engine and hydraulic kit. The Pico flow meter range has been developed in conjunction with Webtec, the industry leading flow meter supplier, and is based on their very popular range of turbine flow meters.

Pico offers the flow meters in versions with three different sizes: 25 l/min, 300 l/min and 600 l/min (please select when ordering!):

Ord.  No: Article: Main Ports: Top Ports: Measuring range: Max. Pressure:
TA376 Pico 25 EU 1/2" BSPP 1/4" BSPP 1-25 lpm 420 bar
TA377 Pico 300 EU 1" BSPP 1/4" BSP1/4" BSP1/4" BSP1/4" BSP1/4" BSP1/4" BSP1/4" BSPP 8-300 lpm 420 bar
TA378 Pico 600 EU 1-7/8”UN 1/4" BSPP 600 lpm 480 bar
All flow meters have a BNC output for direct connection to the PicoScope and an integrated thermistor sensor for measuring oil temperature. They also have an M16x2 Minimess pressure test port for connection to an optional WPS600C hydraulic pressure sensor. The two larger versions also have a built-in load valve that you can use to load the hydraulic system. With PicoScope connected, you can record and capture real-time system performance under load. For easy connection, the flow meters are supplied with BSP inlet and outlet connections.
Please note that the flow meters are designed for use with the PicoScope 4423, 4X25 or 4X25A automotive diagnostic oscilloscopes only.
The flow meter settings require frequency counting, which is only available on these models.
Experienced specialist personnel is required to assemble and use this item!
Technical data:
Ambient temperature: 5 to 40°C (41 - 104°F)
Fluid type: Oils, fuels
Fluid temperature: 5 to 90°C (41 - 194°F) continuous use.
Accuracy  (in preferred direction):
    CT25: 1% of full scale (in preferred direction)
    CT300/600: 15 to 100% of range -1% of indicated reading
        Below 15% fixed accuracy of 1% of 15% of full scale
Output: Frequency: 5-3000 Hz

Construction material:
Flow body: High tensile Aluminium 2014A T6, Aluminium 6082 T6
Internal parts: Aluminium, Steel, Stainless Steel.
Transducer: Aluminium, Steel - electroless nickel plated, Stainless Steel.
Seals: FKM seals as standard.top ports main ports

Average product review

Write your first review and help others with their purchase decision: