WPS600, Hydraulic Pressure Transducer
With high accuracy and a wide measuring range, the WPS600 Hydraulic Pressure Transducer connects to your PicoScope automotive oscilloscope for convenient analysis and diagnosis of pressurised systems.
- Accurately measure up to 600 bar (60 MPa or 8700 psi)
- Ultra-fast 100 microsecond response time (0% to 90% of full scale)
- Internal rechargeable LiPo battery
- Industry Standard M16 x 2 Test point connector
- Auto zeroing
- High noise immunity
- Temperature compensated
- Not for continuous operation
The pressure variation in hydraulic systems depends on a number of system-related factors.
In addition to static pressures there are among others high frequency pulsating pressures with very steep slopes. The system-specific pressure behaviour can be visualized, documented analysed and optimised by measurements.
Nothing compares to the WPS600
It is not unusual to require a different pressure transducer for each diagnostic test you want to run. The WPS600 eliminates this need by giving you one ultra-high resolution transducer that can be used for a multitude of hydraulic diagnostics applications. With two pressure ranges and a rechargeable Li-Po battery, all enclosed in a durable housing the WPS600 is the cost-effective answer to pressure analysis.
When price, performance and versatility matter, there is nothing that compares to the WPS600 pressure transducer.
For the case you don't own a Pico automotive diagnostics oscilloscope yet, we recommend to purchase the 2-channel- PicoScope 4225A together with the WPS600.
Pressure ranges
Two pressure ranges for increased versatility
The two pressure ranges of the WPS600 allow accurate measurement and diagnosis of permanent and non-permanent automotive and industrial hydraulic systems.
Range 1
The first range, 0 to 600 bar (approximately 8700 psi) gives you high resolution and accuracy for high-pressure tests in hydraulic systems.
Range 2
The second range measures from 0 to 60 bar (approximately 870 psi). This range is ideal for low-pressure hydraulic systems and oil pumps.
Technical data:
| Hydraulic Inlet | ||
|
Pressure ranges:
|
0 to 600bar
0 to 60 MPa
0 to 8700 psi
|
0 to 60 bar
0 to 6 MPa
0 to 870 psi
|
|
Connector:
|
M16 hydraulic test port
|
|
|
Voltage output
|
||
| Scaling: |
1 V / 100 bar
1 V / 10 MPa
1 V / 1450 psi
|
1 V / 10 bar
1 V / 1 MPa
1 V / 145 psi
|
| Offset (typical): | Manual zeroing | |
|
Connector:
|
BNC female, fits Pico Technology cable TA130
|
|
| Performance | ||
| Accuracy: | 1% of scale | |
|
Response time (10% to 90%):
|
100 µs
|
|
| Power supply | ||
| Type | Built-in LiPo battery, not user-serviceable | |
| Charging current: | 500 mA (max.) at 4.75 V to 5.25 V | |
|
Charging connector:
|
USB mini, fits Pico Technology cable TA081
|
|
| Ambient operating temperature: | 60 °C (140 °F) max. | |
| Ambient storage temperature: | 60 °C (140 °F) max. | |
|
Environmental protection:
|
Splash-resistant against water, gasoline, diesel and hydraulic fluids. Not immersion-proof. | |
| Weight: | 332 g (11.7 oz) | |
| Dimensions: | 132 x 64 x 31 mm³ (5.2 x 2.5 x 1.2 in³) | |
What’s in the pack?
- WPS600 pressure transducer
- Carrying case
- USB cable
- BNC to BNC cable
- User’s Guide
