TA095, Single-Axis IEPE Accelerometer
TA095, Single-Axis IEPE Accelerometer
The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications.
Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE or the TA487, IEPE signal conditioner.
The TA095 is contained within a kit, which contains a calibration certificate and an introductory guide.
Mounting the accelerometer can be achieved either using the mounting stud fitted, or by using the optional TA096 mounting.
Technical data:
Performance specifications
Sensitivity (±15%): | 10.2mV/(m/s²) |
Measuring range: | ±490m/s² |
Frequency range: | 0.5Hz to 10kHz |
Broadband resolution (1Hz to 10kHz): | 3434µm/s² |
Nonlinearity: | ±1% |
Transverse sensitivity: | ≤ 7% |
Electrical specifications | |
Settling time (within 1% of bias): | ≤ 2.0sec |
Discharge time constant: | ≥ 0.3sec |
Excitation voltage: | 18 to 28VDC |
Constant Current Excitation: | 2 to 20mA |
Output impedance: | < 150 Ohm |
Output bias voltage: | 8-12VDC |
Spectral noise (10Hz): | 78.5 (µm/s²)/square root Hz |
Spectral noise (100Hz): | 49.1 (µm/s²)/square root Hz |
Spectral noise (1kHz): | 39.2 (µm/s²)/square root Hz |
Electrical isolation (case): | > 100 MOhm |
Environmental specifications | |
Overload limit (shock): | 49 050m/s² pk |
Temperature range: | –54 °C to + 121 °C |
Enclosure rating: | IP68 |
Physical specifications | |
Size (hex x height): | 14mm x 64mm |
Weight (with cable): | 99.3g |
Mounting: | stud |
Mounting thread: | 1/4-28 female |
Mounting torque: | 2.7 to 6.8Nm |
Sensing element: | ceramic |
Sensing geometry: | shear |
Housing material: | stainless steel |
Sealing: | molded |
Electrical connector: | molded integral cable |
Cable length: | 3m |