SMA Attenuators, 50 Ohm, 10GHz
These 10GHz attenuators for 50 Ohm systems are suitable for use with high frequency test equipment such as the PicoScope 9000 series of sampling oscilloscopes.
Usually they are used as a safety measure to protect against voltage pulses from damaging the sensitive input of the PicoScope 9000 oscilloscope.
Connectors: SMA (m-f)
There are four attenuation variants available. Please select the required variant from the dropdown menue.
Technical data:
TA181, 3dB, 10GHz attenuator |
Attenuation |
VSWR |
Attenuation deviation (±dB)
|
DC-2 GHz |
2-5 GHz |
5-10 GHz |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
3 dB |
=1.1 |
=1.25 |
=1.35 |
±0.2dB |
±0.3dB |
±0.5dB |
TA261, 6db, 10GHz attenuator |
Attenuation |
VSWR (voltage standing wave ratio) |
Attenuation deviation (+/-dB) |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
10 dB |
=1.1 |
=1.25 |
=1.35 |
+/-0.2dB |
+/-0.3dB |
+/-0.5dB |
TA262, 10db, 10GHz attenuator |
Attenuation |
VSWR (voltage standing wave ratio) |
Attenuation deviation (+/-dB) |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
10 dB |
=1.1 |
=1.25 |
=1.35 |
+/-0.2dB |
+/-0.3dB |
+/-0.5dB |
TA173, 20dB, 10GHz attenuator |
Attenuation |
VSWR |
Attenuation deviation (±dB)
|
DC-2 GHz |
2-5 GHz |
5-10 GHz |
DC-2 GHz |
2-5 GHz |
5-10 GHz |
20 dB |
=1.1 |
=1.25 |
=1.35 |
±0.2dB |
±0.3dB |
±0.5dB |