PicoScope 6407, 4-Channel High-Speed Digitizer, 1GHz, 5GS/s, Buffer: 1GS, FG+AWG

  • Item no.: PP795
  • Delivery status: ca. 1 week
  • Shipping time: 9 - 10 workdays
  • Our price : 8.395,00 €
  • Excluding 16% VAT.
Loading ...

Manufacturer:
  • Pico Technology
resolution:
channels:
band width:

Description

PicoScope 6407, 4-Channel High-Speed Digitizer, 1GHz, 5GS/s, Buffer: 1GS, FG+AWG

  • 4 channels
  • 1 GHz bandwidth
  • 1 GS buffer size
  • 5 GS/s real-time sampling
  • Built-in function generator/AWG
  • USB-connected

    High?speed data acquisition
    The PicoScope 6407 Digitizer is a compact USB plug-in device that turns your PC or laptop into a 4-channel, high-speed digitizer. With a PicoScope 6407 you can easily digitize a 1 GHz  sine wave with a timing resolution of 200 ps.

    Huge buffer memory
    Your PicoScope 6407 digitizer has a memory depth of one billion samples. Other digitizers have high maximum sampling rates, but without the deep memory of the PicoScope 6407 they can?t sustain these rates on long timebases. Your PicoScope 6407 can sample at 5 GS/s  at timebases all the way down to 20 ms/div, giving a total acquisition time of 200 ms. If that?s not enough, the driver supports streaming mode for capturing unlimited gap-free data directly to your PC?s RAM or hard disk at over 10 MS/s.
    The large buffer enables the use of segmented memory. Each captured waveform segment is stored in the buffer so you can rewind and review thousands of previous waveforms. No longer will you see a glitch on the screen only for it to vanish before you stop the scope.

    Advanced triggers
    As well as the standard range of triggers found on all oscilloscopes, your PicoScope 6407 offers a comprehensive set of advanced triggers including pulse width, windowed and dropout triggers to help you capture the data you need.
    USB-connected. Why make things difficult?
    Many digitizers use complicated - and often expensive - interfaces to connect the digitizer to your PC. The PicoScope 6407 doesn?t. Your PicoScope high-speed digitizer simply connects to a USB port on any compatible Windows-based PC or laptop. So there?s no need to buy a separate interface or waste time dismantling your PC to connect the digitizer. (The ability to just plug-in your digitizer to a USB port, along with the small size and weight of the PicoScope 6407, also means that you can take your PicoScope Digitizer with you -giving you access to a high?speed digitizer wherever you are.)

    More than just a digitizer
    At Pico we are committed to providing value for money. That?s why when you buy a PicoScope 6407 USB Digitizer you don?t just get a digitizer. Using the power of the supplied PicoScope software you can use your PicoScope 6407 as a 4-channel, 1 GHz  oscilloscope with a voltage range of -100 mV to +100 mV. Alternatively you can use the spectrum analyzer function in PicoScope for recording measurements in the frequency domain. But that?s not all? Your PicoScope 6407 also includes a built-in function generator and an arbitrary waveform generator (AWG) with a 16,000 sample buffer.

    Free software development kit
    Your PicoScope Digitizer comes with a software development kit (SDK) that includes drivers for Windows?based PCs and example code for various programming languages and third-party software such as LabVIEW. Using the SDK you can develop your own programs to collect and analyse data from the digitizer.

    Why pay more?
    At Pico we don?t do ?optional extras?. Other companies may think that you should pay for high-end features such as mask limit testing, serial decoding, advanced triggering, automatic measurements, math channels, XY mode, digital filtering and segmented memory. We don?t. When you buy a PicoScope Digitizer everything is included in the price.
    Power. Performance. Portability
    With 4 channels, 1 GHz  bandwidth, 1 GS  buffer size and 5 GS/s  real-time sampling, a USB?connected PicoScope 6407 Digitizer gives you the power, performance and portability you need at a price you can afford.


    Technical Data:

    Oscilloscope - Vertical
    Model PicoScope 6407
    Bandwidth (-3 dB) 1 GHz
    Rise time (calculated) 350 ps
    Input channels 4
    Vertical resolution 8 bits
    Enhanced vertical resolution 12 bits
    DC accuracy ±3%
    Input sensitivity 20 mV/div
    Input impedance 50 Ohm  ±2%
    Input type SMA
    Input coupling DC
    Input ranges (full scale) ±100 mV
    Overvoltage protection ±2 V  (DC + Peak AC)
    Oscilloscope - Horizontal
    Maximum sampling rate (single shot)
    1 channel in use
    2 channels in use
    3 or 4 channels in use

    5 GS/s
    2.5 GS/s (using A+C, A+D, B+C, B+D)
    1.25 GS/s
    Maximum sampling rate
    (continuous streaming mode)
    1 MS/s  using PicoScope
    >10 MS/s  using the supplied SDK (PC dependent)
    Buffer memory
    (shared between active channels)

    1 GS
    Waveform buffer Up to 10,000 waveforms
    Timebase accuracy ±5 ppm
    Dynamic Performance (typical)
    Crosstalk
    DC to 100 MHz
    100 MHz to 1 GHz

    100:1
    30:1
    Step response ±3% after 3 ns, typical
    Noise <0.5 mV RMS
    Triggers
    Basic triggers Rising, falling
    Advanced triggers










    Edge: single edge or dual edge; adjustable hysteresis
    Pulse width: negative or positive pulse; wider or narrower than a specified width
    Window: entering or leaving a voltage range
    Dropout: inactivity over a user?defined time interval
    Window dropout: signal does not enter or exit a voltage range for at least a set time
    Interval: time between two edges is greater or less than a set time, or inside/outside a time range
    Logic level: arbitrary logic state of Channels A, B, C, D and AUX
    Runt pulse: crosses one threshold but not the other
    Trigger modes Edge, pulse width, dropout, interval, logic, delayed
    Maximum trigger rate Up to 10,000 waveforms in a 20 ms  burst
    Trigger sources Channels A to D, AUX
    Trigger level Adjustable over whole of selected voltage range
    Re?arm time <1 µs  on fastest timebase
    Maximum trigger delay
    pre?trigger
    post?trigger

    Up to 100% of capture duration
    Up to 4 billion samples
    Auxiliary Trigger/Reference Clock Input (AUX)
    Input type Rear panel BNC
    Input impedance 50 Ohm  ±1%
    Input coupling DC
    Voltage range ±5 V
    Bandwidth (AUX TRIGGER) 25 MHz
    Input threshold ±1 V
    Overvoltage protection ±5 V
    Frequency range (CLOCK INPUT) 5 MHz  to 25 MHz
    Signal generator
    Standard output waveforms Sine, square, triangle, ramp (up/down), sin (x)/x, Gaussian, half-sine, white noise, PRBS, DC level
    Frequency range DC to 20 MHz
    Output frequency accuracy ±5 ppm
    Output voltage range (peak to peak) ±250 mV  to ±2 V  (into high impedance load)
    Offset voltage adjustment ±1 V  (maximum combined output ±2.5 V)
    Amplitude flatness 1.5 dB  DC to 20 MHz, typical
    Connector type Rear panel BNC
    Overvoltage protection ±5 V
    Sweep modes Up, down, dual with selectable start/stop frequencies and increments
    Arbitrary Waveform Generator
    Sample rate 200 MS/s
    Buffer size 16,384 samples
    Resolution   12 bits
    Bandwidth 20 MHz
    Rise time (10 ? 90%) 10 ns, typical
    PC Requirements
    Minimum



    Processor: Pentium II processor, or equivalent
    Memory: 64 MiB (XP) / 512 MiB (Vista) / 1 GiB (Win 7)
    Operating system: 32- or 64-bit edition of Microsoft Windows XP SP2, Vista or Windows 7
    Ports: USB 2.0 compliant port
    Recommended



    Processor: 2 GHz  Pentium IV processor, or equivalent
    Memory: 256 MiB (XP) / 1 GiB (Vista / Win 7)
    Operating system: 32- or 64-bit edition of Microsoft Windows XP SP2 (or above), Vista or Windows 7
    Ports: USB 2.0 compliant port
    Environmental
    Operating environment
    Temperature range

    0 °C to 40 °C (20 °C to 30 °C for quoted accuracy)
    Storage environment
    Temperature range
    Humidity

    -20 °C  to +60 °C
    5% to 95% RH, non-condesning
    IP rating IP 20
    Physical Properties
    Dimensions 255 x 170 x 40 mm
    (approx 10 x 6.7 x 1.6 in)
    Weight <1 kg (approx 2 lb  2 oz)
    Software
    PicoScope 6 for Windows PicoScope 6 is your complete test and measurement lab in one application. Features include:
    Capture modes: oscilloscope, spectrum and persistence.
    Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions.
    Mask limiting testing: pass/fail, failure count, total count.
    Serial Decoding: decode data from a serial bus such as I²C.
    Automated measurements
    Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak?to?peak, rise time and rising rate.
    Spectrum mode: frequency at peak, amplitude at peak, average anplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD).
    Export data formats: comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT).
    Software development kit Includes drivers and example code for various programming languages including C, Excel and LabVIEW.
    Language Support
    Software
    PicoScope 6

    Full support for: English, Français, Deutsch, Italiano, Español
    Menus and dialogs only for: Ce?tina, Dansk, suomi, Magyar,  Norsk, Polski, Português, româna, Svenska, Türkçe
    Documentation
    User?s guide
    Programmer?s guide
    Quick Start Guide

    English
    English
    English, Français, Deutsch, Italiano, Español
    General
    Data sheet English, Deutsch, Español, Français, Italiano
    Additional hardware (supplied) USB 2.0 cable, carry case, user manuals and software CD-ROM
    PC interface USB 2.0
    Power supply
    AC adaptor
    12 V  ±2 V  @ 3.5 A
    External adaptor supplied (suitable for USA, UK, Europe and Australasia)
    Compliance European EMC and LVD standards
    FCC Rules Part 15 Class A
    RoHS compliant
    Warranty 5 years



    What do I get?
    • PicoScope 6407 USB Digitizer
    • USB cable
    • Universal AC adaptor
    • Tough carry case
    • PicoScope oscilloscope software
    • Software development kit
    • Free software updates
    • 5 year warranty

    • Ratings

        Average product review:

        (This product has got No Reviews)

        Share your experience with other customers

        Related products