NVH Diagnostics "Essential Standard" Kit with Opto Kit in a Carry Case

Item number: PQ269

  • This kit also contains the PicoScope 4425A oscilloscope
  • 3-axis vibration measurement plus 1 axis for vibration or sound at another location in the same vehicle
  • Includes two 3-axis accelerometers and two microphones
  • Includes also the optical balancing kit
  • Detects and analyses multiple vehicle vibrations
  • Plugs into your automotive PicoScope®
  • Full screen, high-resolution results are presented clearly and accurately
  • No external memory required - saves directly to laptop or PC
  • Record up to 500 seconds of data
  • Category: NVH Diagnostics, Vibrations & Noises

    2.749,00 €

    Excluding 19% VAT.

    Delivery status: ca. 1 week

    Shipping time: 0 workdays

    NVH Diagnostics "Essential Standard" Kit with Opto Kit in a Carry Case

    The "Essential Standard" kit also contains the PicoScope 4425, 4-channel automotive diagnostics oscilloscope, including the very convenient diagnostics software.
    This Kit is identical to the "Essential Standard"- Kit,  Ord. no.: PQ268, but it also contains the components of the optical balancing kit.

    Please note:
     The NVH kit from Pico Technology only works with our Automotive PicoScopes, and requires an unlock code in order to allow your PicoScope to work with the NVH software. This unlock key is limited to one PicoScope Automotive scope and is not transferable. Supported PicoScope models are 4425 and 4423. RPM data may be taken from a J2534 Scan Tool or VCI (not included).

    • 3-axis vibration measurement plus 1 axis for vibration or sound at another location in the same vehicle
    • Includes two 3-axis accelerometers and two microphones
    • Includes also the optical balancing kit
    • Full screen, high-resolution results are presented clearly and accurately
    • No external memory required - saves directly to laptop or PC
    • Record up to 500 seconds of data
    • Automatic analysis
    • Detects multiple vehicle vibrations
    • Customer report function
    • Plugs into the supplied PicoScope 4425A automotive oscilloscope

    The PicoDiagnostics NVH Kit from Pico Technology is the cost-effective answer to the many NVH (noise, vibration, harshness) problems facing technicians today. Providing real-time diagnosis to the technician in the form of either:

    • a bar graph,
    • a frequency chart,
    • a 3D frequency chart, RPM order or road speed view.

    The 3-axis accelerometer is mounted at a suitable location in the vehicle and connected to the NVH interface.
    The three outputs of the NVH interface are connected to three inputs of the 4-channel PicoScope via the supplied colour-coded BNC connecting cables. This allows to monitor the behaviour of a vibration in each axis individually and hence improves the system's ability to identify and hence the user's ability to fix a given problem. For some problems this ability to look at all 3 axes independently is key to identifying a problem.
    With this 4-axis version a further 3-axis accelerometer (whereof only one axis used) or a microphone is connected to the fourth oscilloscope input in order to detect vibrations or noise at another location in the same vehicle.
    A separate J2534 Scan Tool or VCI (not supplied) can be used to provide RPM data.

    The ability to start the recording before a road test, and play back the recording for analysis on your return, ensures that driver attention remains on the road. Saving the recordings couldn't be simpler: much like our other automotive software you simply save the file to your laptop's hard drive.

    The PicoDiagnostics NVH kit is connected to the PicoScope 4425A automotive oscilloscope and comes complete with everything you need. You can be sure that your investment in the PicoDiagnostics NVH kit will benefit your business without the need for further spending.

    The PicoScope 4425A can also be used for a variety of further measurements for the automotive diagnostics. For this, you will need some more practical measuring accessories ( measuring leads, clips, adaptors etc.) which you can anytime at a later date:

    Automotive Diagnostics Accessories

    Typical uses:
    Customer complaints surrounding noise/vibration are subjective at best and present technicians with a challenge before diagnosis and rectification begins. Applying the NVH kit to the vehicle will allow the technician to road-test the vehicle with the customer to obtain all vibration and noise levels. Once this valuable data has been collected it can be analysed and compared to previous captures or against donor vehicles. Often what is perceived by the customer to be a "problem" vibration is in fact a characteristic. Now you can present and compare objective data with test results from donor vehicles to reassure your customer that all is well. Alternatively, comparing data may highlight a problem within the vehicle allowing the technician to proceed to a repair with confidence supported by measurements taken. Below are just a few of the typical scenarios where the NVH kit can save time and money:

    • Cabin vibrations at speed
    • Engine vibrations throughout the entire rev range
    • Clutch judder/vibration
    • Transmission and bearing whine
    • Auxiliary drive noise
    • Brake judder
    • Steering vibrations
    • Propshaft balancing
    • Generally: balancing of rotating components

    Technical data:

    Weight (Interface / Vibration Sensor / Microphone) 120g / 80g / 20g
    Sensor Interface (inc. BNCs):
    Magnet (inc. fitted grub screw):

    105mm x 65mm x 27mm
    43mm x ø17mm
    12mm x ø18mm
    Sensor extension lead length: 3m
    Battery (Lithium Primary Cell): CR123(A) 3V (user replaceable)
    Battery life (Shelf / Vibration mode / Microphone mode): 10 years / 6 months / 2 months
    Maximum measurable acceleration: ±5g
    Vibration frequency range (3 dB): DC to 350Hz
    Shock survivability (accelerometer head): 10,000g
    Temperature range (operating) accelerometer head: -40°C to 85°C
    Thread mounting (accelerometer): ¼" x 28 UNF
    Microphone sensitivity: 45mV/Pa, nominal, at 1kHz
    EMC approvals: CE: Meets EN61326-1:2006



    Your PicoDiagnostics NVH Kit contains the following items:


    • PQ174  PicoScope 4425A, 4-channel automotive diagnostics oscilloscope with software 
    • TA259  2 x 3-output NVH interface unit
    • TA096  2 x Mounting magnet for accelerometer
    • TA143  2 x MEMS accelerometer
    • TA243  Cable: insulated BNC to BNC 0.5 m blue
    • TA244  Cable: insulated BNC to BNC 0.5 m red
    • TA245  Cable: insulated BNC to BNC 0.5 m green
    • TA260  Cable: insulated BNC to BNC 0.5 m yellow
    • TA144  2 x Microphone for NVH kit
    • TA145  2 x Sensor extension cable for NVH interface unit
    • PA047  Carry case for NVH kit
    • TA185 Optical sensor interface with battery
    • TA186 Optical sensor with 3.5mm headphone jack
    • TA187 Magnetic base for the optical sensor
    • TA260 0.5m cable with insulated BNC plugs
    • TA196 Reflecting tape for propshaft balancing

    Optional Accessories:
    TA293  Mongoose Pro ISO/CAN J2534 lead for the acquisition of a road speed signal via the OBD port

    Average product review

    Write your first review and help others with their purchase decision: