Description
EL001, 3 Channel Converter, Accessory for EnviroMon
The three channels on the EL001 can measure any mix of temperature, light level or switch position. The following sensors are available, all have 5 meter leads for connecting to the converter.
-
EL029 Switch position / door switch sensor The switch module is commonly used to monitor whether a door is open or closed. In normal use a (supplied) magnet is attached to the door to be monitored and the EL029 to the door frame. Alternatively an external microswitch (not supplied) can be wired in. The display on the logger reports either 'Open' or 'Closed'.
-
EL015 Temperature sensor The EL015 is a precision resistive sensor suitable for measuring temperature from -30°C to +70°C. Unless the temperature you need to measure is outside this range this sensor represents the best choice for measuring temperature.
Please note: The EL001 is not waterproof.
The EL001 can only work if it is connected to the EnviroMon datalogger EL005!
The EL001 is supplied without sensors. These need to be ordered separately.
Technical data:
| EL015 Temperature | EL029 (Door) switch | |
|---|---|---|
| Range | -30 °C to 70 °C | Closed / Open |
| Resolution | 0.01 °C | NA |
| Accuracy | ± 0.3 °C | NA |
| Dimensions | Ø6mm by 50mm on a 5m lead | 72 x 45 x 28mm³ with a 5m lead |
Suitable for the connection to the EL005 datalogger via the supplied 5m network cable (EL003).
Up to 3 sensors for temperature or door contact monitoring can be connected to the converter via the western connectors.
Up to max. 10 converters can be operated within an EnviroMon network.
The EL001 is suitable for an indoor operation with less dust and air humidity.
Converter housing sizes: 125 x 60 x 20 mm³
Supplied with a network cable EL003.
