DrDAQ 2011 Kit, USB Experimental Data Logger/Oscilloscope with additional ext. Sensors

  • Item no.: PP707
  • Delivery status: ca. 1 week
  • Shipping time: 9 - 10 workdays
  • Our price : 279,00 €
  • Excluding 16% VAT.
Loading ...

Manufacturer:
  • Pico Technology DrDAQ
Category:

Description

DrDAQ 2011 Kit, USB Experimental Data Logger/Oscilloscope with additional ext. Sensors

Low-cost data logger/oscilloscope/spectrum analyser/arbitrary waveform generator (AWG) for hobbyists, students, professionals, scientists!

This kit contains the following accessories: 
USB DrDAQ, software, 2 temperature sensors, 1 pH sensor, 1 humidity sensor und 1 oscilloscope probe. 

For education and studies increasingly, computers are used. With the  USB DrDAQ there is a low-cost data logger now, which is connected to the USB port of a PC, and which can be used for varous interesting experiments. 
  • Built-in sensors for light, sound and temperature
  • 4 digital inputs and outputs
  • 3 sockets for external sensors
  • Ultra-high impedance input for pH or Redox measurements
  • 100 kHz, 8-bit oscilloscope with a ±10 V  range
  • Signal generator with AWG for creating your own waveforms
  • Captures fast signals
  • USB connected and powered
  • Use up to 20 USB DrDAQs on a single PC
  • Supplied complete with PicoLog, PicoScope and an SDK

The new USB DrDAQ data logger offers an amazing collection of 15 channels in a compact, low-cost device that is perfect for hobbyists, teachers and technicians. It is supplied with full versions of the PicoScope and PicoLog software, so that all of its capabilities are ready to use, straight out of the box.

Sensors
Thanks to the built-in sensors for light, sound and temperature you can start using your USB DrDAQ Data Logger straight out of the box. (Doctor DAQ has also included an RGB LED that you can program to show any 1 of 16.7 million colours.)

When you want to do more with your DrDAQ you can thanks to the external sensor sockets. Simply buy an external sensor and your DrDAQ can measure humidity, oxygen levels, external temperatures and more. We provide you with all you need to know to connect external sensors to your DrDAQ so you can even design and use your own sensors.

Digital I/Os
Your USB DrDAQ also includes 4 digital input/outputs. In input mode these give you even more monitoring options. When used as outputs they enable you to use your DrDAQ to control external devices. 2 of the digital I/Os include a pulse-counting function when used as inputs, and a pulse-width modulation (PWM) output capability.

More than just a data logger
Thanks to the power of your DrDAQ you can also use it as an oscilloscope or spectrum analyzer.Just run the supplied PicoScope software and your DrDAQ becomes a single-channel scope with a 100 kHz  bandwidth, 8-bit resolution and the ability to measure voltages of up to ±10 volts. But that`s not all. Your DrDAQ also includes a signal generator. The signal generator output not only includes a standard function generator, but also an arbitrary waveform generator (AWG) too.Using the AWG function you can create your own waveforms.

Hobbyist, student or professional - DrDAQ is all you need
The USB DrDAQ Data Logger has something for everyone: whether you`re a teacher looking for a fun way to perform data logging experiments in the classroom, a student wanting an inexpensive introduction to data logging and oscilloscopes, a computer programmer who wants to use C++ to monitor and control inputs and outputs of real-world devices, an hobbyist who wants to monitor and control their environment, or a professional wanting to measure pH under laboratory conditions - DrDAQ is all you need.

All the software you want - and it`s free
The PicoScope oscilloscope software uses the power of your PC or laptop to deliver high performance, and has an easy-to-use Windows interface. All of its advanced features, such as spectrum analysis, automatic measurements and statistics, are included in the price of your USB DrDAQ.
PicoLog is a powerful yet flexible data acquisition program designed for collecting, analysing and displaying data over long or short periods of time. Data can be viewed both during and after collection in spreadsheet or graphical format. The data can also be easily exported to other applications.
If you want to write your own software or use the DrDAQ with third party software we provide a free software development kit (SDK). The SDK includes drivers for Windows XP (SP2 or later), Vista and Windows 7 (32- and 64-bit), and programming examples for C, C++, LabVIEW and Excel.

Technical data: 

DrDAQ Data Logger General Specifications

Number of channels

14

Maximum sampling rate
Block mode
USB streaming


1 MS/s#
100 kHz#

Memory depth (block mode)

16 kS#

Memory depth (USB streaming)
PicoLog
PicoScope
Using the API


1 MS#
20 MS#
unlimited

# Shared between active channels.

Oscilloscope/Spectrum Analyser Channel

Bandwidth

100 kHz

Resolution

8 bits

Input characteristics

1 MOhm

Input type

Single-ended, BNC connector

Input coupling

DC

Input ranges (full scale)

±1.25 V, ±2.5 V, ±5 V, ±10 V

DC accuracy

±3%

Time bases

10 µs/div to 200 s/div

 

Function Generator/Arbitrary Waveform Generator (AWG)

Channels

1

Connector

BNC

Standard waveforms

Sine, square, triangle, ramp (up/down), DC level

Function generator frequency range

DC to 20 kHz

Signal amplitude

0 to 1.5 V

Signal offset

+1.5 V

AWG buffer size

4096 samples

AWG update rate

2 MS/s (maximum)

AWG resolution

10 bits

 

Built-in Sensors/Outputs

Channel

Range

Resolution

Accuracy

Sound waveform

±100

±0.2

not calibrated

Sound level

55 to 100 dBA

1 dBA

5 dBA

Temperature

-10 to +70°C

0.1°C  @ 25°C

2°C  @ 25°C

Light

0 to 100

0.1

not calibrated

RGB LED

16.7 million colours

8 bit x 3

not applicable

 

Analogue Inputs

Type

Connector

Range

Resolution

Accuracy

pH

BNC

0 to 14 pH

0.02 pH

Sensor calibration dependent

Redox/ORP

BNC (shared with pH)

±2000 mV @ 1012 Ohm 

1.2 mV

Sensor calibration dependent

Resistance

Screw terminal

0 to 1 MOhm

250Ohm @10k

5%

External sensors

3 x FCC68 4/4

Measure 0 to 2.5 V
(Also supply power to external sensors and identify sensor type via ID resistor.)

1 mV

1%

 

Configurable Digital IO

Channels

4

Connector type

Screw terminals

Input characteristics

0 to 5 V (Low: 0- 0.8 V, High: 2 -5.5 V)
TTL compatible

Output characteristics

3.3 V, 2.2 kOhm output impedance

PWM output
Period
Pulse
Resolution


<65535 µs
<65535 µs
1 µs
Available on 2 Digital IO channels

Pulse counting

Up to 65535 counts @ 500 kHz
Available on 2 Digital IO channels

 

Physical Dimensions

Dimensions

77 x 70 x 23 mm³  (approx 3 x 2.7 x 0.9 in)
(includes BNC connectors)

Weight

60 g  (approx 2.1 oz)

 

Software

PicoLog for Windows

PicoLog data acquisition software can collect up to 1 million samples. Features include:
Multiple views - view data as a graph, spreadsheet or text
Parameter scaling - convert raw data into standard engineering units
Math functions - use mathematical equations to calculate additional parameters
Alarm limits - program an alert if a parameter goes out of a specified range
IP networking - transfer measurements via a LAN or over the Internet

PicoScope 6 for Windows

PicoScope 6 is your complete test and measurement lab in one application. Features include:
Capture modes- oscilloscope, spectrum and persistence modes
Channel maths- calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions
Automated measurements
Scope mode: ACRMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak-to-peak, rise time and rising rate
Spectrum mode: frequency at peak, amplitude at peak, total power, total harmonic distortion (THD), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD)
Export data formats- Comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG),MATLAB4 format (MAT)

Software development kit

A growing collection of drivers and example code for various programming languages including: C, C++, Excel and LabVIEW.

 

Language support

Software
PicoLog

PicoScope 6

Full support for English, French and German; menus only for Italian, Spanish and Swedish
Full support for English, French, Italian, German and Spanish. Menus and dialogs only for Dutch, Hungarian and Simplified Chinese.

Documentation
User`s guide
Programmer`s guide

 

English
English

 

General

Additional kit   hardware (supplied)

USB 2.0 cable, user manuals, software CD-ROM, 2 temperature sensors, 1 pH sensor, 1 humidity sensor und 1 oscilloscope probe.

PC interface

USB 2.0 (USB 1.1 compatible)

Power requirements

Powered from USB port

Compliance

FCC (EMC), CE (EMC and LVD),RoHScompliant

Warranty

5 years


Suitable sensors you find in the category  "DrDAQ- Accessories"

Ratings

    Average product review:

    (This product has got No Reviews)

    Share your experience with other customers