Current Clamp Adaptor, 30A AC/DC

Item number: TA234

  • Current Clamp Adaptor, 30A AC/DC
  • Measuring range: 30mA to 30A DC (accurate)
  • Accuracy: ±(2% of reading ±2mA)
  • BNC connector
  • Max. wire diameter: 19mm

Category: Cables, Connectors & Adaptors

266,00 €

Excluding 19% VAT.

Delivery status: ca. 1 week

Shipping time: 0 workdays

Current Clamp Adaptor, 30A AC/DC

The TA234 probe is a 30 A current clamp. The extended measuring jaws allow measurement in a confined space and are big enough to fit around a battery cable, so it is ideal for studying battery drain issues. When measuring DC, a simple thumbwheel on the probe allows zero adjustment.

This current clamp is ideally suited for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup.

Technical data:

Electrical data

Nominal current 30A AC peak  or DC
Measuring range (s) 30mA to 30A DC (accurate)
5mA to 30A DC (usable)
Overload capacity 500A for 60 s
Output sensitivity 100mV/A
Accuracy ±(2% of reading ± 2mA)
Resolution ±1mA DC after filtering
di/dt tracking capability >20A/µs
Conductor position sensitivity ±1% relative to center
Temperature coefficient 0.1 x specified accuracy/°C
(0°C to 18°C, 28°C to 50°C)
Frequency range DC to 20kHz (-0.5 dB)
Battery type 9V PP3, MN 1604, 6F22, 6LR61
Min. load impedance 1MOhm

All accuracies stated at 23 °C ±5 °C, 70 %Rh max.


General data

Max. conductor size 19mm diameter
Output cable and connectors 2m long coax terminated with safety BNC connector
Operating temperature +5°C to +40°C
Storage temperature (excluding battery) -20°C to +70°C
Humidity 0 to 80% RH
Altitude 0 to 2000m
Weight 300g
Dimensions (H x W x D) 200mm x 72mm x 38mm

EN 61010-1:2010
EN 61010-2-032:2012
CAT IV 600 V, CAT III 1000 V
EN 61326-1:2006
EN 61326-2-2:2006
Environmental RoHS and WEEE compliant

Average product review

Write your first review and help others with their purchase decision:

Other customers have also bought the following items