Description
AD2801, Differential Scope Probe, 30V, 800MHz, x10
The AD2801 is a high-bandwidth differential probe. With a fast 800 MHz bandwidth it is ideal for measuring high-speed differential signals.
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making differential voltage measurements. Applications include making safe measurements in power circuit applications and acquisition of high-speed balanced differential signals found in serial communications buses.
Recently redesigned, the AD2801 replaces the TA046 with the same performance specifications, but with improved powering options.
This probe now includes an in-line battery module, with a 5V USB power lead integrated for use with standard off-the-shelf USB chargers.
The kit includes the following items:
- AD2801 probe body, power unit and BNC assembly
- 1 pair test wires, red and black, 0.8 mm x 70 mm
- 1 pair test wires, red and black, 0.8 mm x 130 mm
- 1 pair large grabbers, 5 mm wide, red and black
- 1 pair small grabbers, 2.5 mm wide, red and black
- Test tip, 0.8 mm, 6 pcs
- 2-pin prods, assorted lengths, 3 pcs
- 9 V battery
- USB power cable (mains adaptor not included)
Technical data:
| Bandwidth: | DC to 800MHz (twin pin configuration) |
| Accuracy: | ±2% |
| Input impedance: | 100kOhm || 2pF |
| Attenuation: | 10:1 |
| Input voltage: | |
| Max. differential: | ±15V |
| Max. common mode: | ±30V |
| Absolute max. voltage: | ±40V |
| Output voltage: | |
| Swing (into 50 Ohm load): | ±1.5V |
| Offset (typical): | < ±5mV |
| Noise (typical): | 0.3mV RMS |
| Output impedance (typical): | 50 Ohm |
| CMRR (typical): | 60dB at 60Hz; 15dB at 500MHz |
| Output BNC cable length: | 1.2m |
| Power requirements: | |
| Battery: | 9V (PP3, 6LR61) |
| Mains adaptor(s): | 6VDC 500 mA or 9VDC 300mA |
| USB power lead: | 5VDC |
| General: | |
| Ambient operating temperature: | –10 to +40°C |
| Ambient storage temperature: | –30 to +70°C |
| Weight: | 130g |
| Dimensions (LxWxH): | 111mm x 22mm x 14mm |
| Compliance: | Designed and tested in accordance with the European standard publication EN 61010-031:2015 (Safety requirements for hand-held probe assemblies for electrical measurement and test) |
