PicoScope 9301-25 Kit, 2-Channel, 16 Bit, 25 GHz Sampling Oscilloscope

Item number: PQ094

  • sampling oscilloscope
  • 2 channels
  • 25 GHz
  • 16 Bits
  • Category: Pico RF Products and Accessories


    18.785,00 €

    Excluding 19% VAT.

    Delivery status: ca. 1 week

    Shipping time: 7 workdays

    pc.


    PicoScope 9301-25 Kit, 2-Channel, 16 Bit, 25 GHz Sampling Oscilloscope

    Sampling oscillloscope kit for signal integrity measurements and characterisation of  RF components, SERDES devices, cables, PCBs, and connectors.

    • 25 GHz bandwidth, 17.5 ps transition time
    • 0.064 ps time interval resolution, jitter < 2.0 ps rms + 20 ppm delay
    • 16-bit resolution and < 2.0 mV rms noise
    • 2.5 GHz trigger bandwidth or 14 GHz pre-scaled trigger bandwidth
    • Industry-leading effective sampling rate 15 TS/s, trace length up to 32 kS
    • Integral signal generator: Pulse, PRBS NRZ, PRBS RZ, 500 MHz clock, Meander, Trigger out
    • Eye diagram, eye line, histograms and mask test on NRZ and RZ serial data
    • PicoSampleTM 3 software for Windows XP (SP2) / Vista / 7 / 8 /10 with Active X control interface
     
    For further details please download:
     

    Small enough to be applied directly to the device under test, or close by, Pico Sampling Oscilloscopes are extremely high-performance and cost-effective measuring instruments for high-speed digital, communications, RF and microwave applications.

    Sampling Oscilloscopes achieve better bandwidth and timing resolution than their traditional oscilloscope counterparts. They do this by sampling the signal more slowly, but right at the input connector. A sampling oscilloscope builds a waveform display as the input signal repeats and is not suited to single-shot capture applications. The true power of a sampling oscilloscope is realised when the signals to be measured have a repeating or cyclic pattern, or a steady data rate.

    Sampling Oscilloscopes typically have high resolution, an input impedance of  50 Ohm and a single gain range. Active probes and external attenuators are added to achieve high impedance measurement and wider dynamic range.

     

    Big Performance from Little Packages

    • Trigger rate to 14 GHz
    • Timing resolution down to 0.064 ps
    • Fastest available waveform builds!

    With the fastest available sampling rate, Pico sampled waveforms and persistence displays are captured three times faster than competing sampling oscilloscopes, which are often bulky and three times the price.

    With their powerful and unique trigger, hold-off and acquisition features, Pico samplers can lock to repeating signal features with minimal jitter. All models have trigger pre-scalers (frequency dividers) to allow triggering at up to 14 GHz, while the comprehensive acquisition modes, trigger modes and timebase ranges can display frequency below 100 Hz through to an effective sampling rate of 15 TS/s!


     PicoScope 9300 Models Compared:

    PicoScope   9301     9302    9311    9321    9341 
    15 GHz model 

    x

    x

    x

    20 GHz model 

    x

    x

    x

    25 GHz model 

    x

    x

    x

    Number of electrical inputs 

    2

    2

    2

    2

    4

    Signal generator output

    x

    x

    x

    x

    x

    Integrated TDR/TDT (60ps, 2.5 to 7V) 

    x

    Add external PG900 TDR/TDT source 

    x

    x

    optional*

    x

    x

    9.5 GHz optical-electrical converter

    x

    Clock recovery trigger

    x

    x

    Pattern sync trigger

    x

    x

    x

    x

    x

    USB port

    x

    x

    x

    x

    x

    LAN port

    x

    x

    x

    x

    x

    * PG900 external source can be used in addition to the built-in TDR/TDT source.


    The included PicoSampleTM software for Windows presents a user-configurable, intuitive interface on Windows XP (SP2 or SP3), Windows Vista, Windows 7, 8 or 10, platforms and all supported display resolutions.

    Powerful, Intuitive, Uncluttered Software
    • Flexible control-menu user interface
    • Click and drag on display to zoom
    • Informative colour density profiling
    • Histograms and numeric statistics

    Pico's PicoSampleTM software for Windows is included, presenting a user-configurable, intuitive interface on Windows XP, 7 or 8 platforms and all supported display resolutions.

    Comprehensive controls are presented in easy-access menus either side of the trace display area. You can select the controls you need, and hide the rest to reduce clutter.

    Multiple trace windows support colour or density profiling, vertical or horizontal histograms and 138 pre-defined trace, eye and statistical measurements; up to ten tabulated simultaneously.

    167 standard serial data communications masks are included with user margin, editing and custom mask compilation.

    61 trace math functions can be applied using buttons or a formula editor.

     

    The PicoScope 9301-25 Kit contains:
    PicoScope 9301-25 sampling oscilloscope
    DI100    PicoSampleTM 3 software
    DO134  Quick Start Guide
    PS010   Power supply 12VDC @ 3.5A, universal input
    MI106    USB 2.0 cable, 1.8m
    TA076    LAN cable, 1m
    TA168    SMA/PC3.5/2.92 wrench
    MI272    Storage and carry case
    TA170    2 x connector saver adaptors, 18GHz, 50 Ohm, SMA
     
     
    Optional accessory:
    TA061    1.5GHz, 50Ohm passive probe, x10, SMA

    resolution: 16 bit
    channels: 2-channel
    band width: 20 GHz

    Average product review

    Write your first review and help others with their purchase decision: